Play with Particles - Gravity Simulation User Guide

I. Overview

Play with Particles - Gravity Simulation is a tool that simulates the movement and changes of particles under the action of gravity. With this tool, users can customize the color, size and number of particles and observe the dynamic effects of particles in the simulated gravity field.

II. Function Parameter Description

Color Mode:

This option allows users to select different color modes, which may be single color, gradient color or other color change modes. The specific mode depends on the design of the tool.

Particle Color:

Users can select or set the color of the particles. This can be a single color, a color range or a gradient effect.

Particle Size:

Set the initial size of the particles. In the example given, the particle size is 1.5 (the specific unit may vary depending on the tool, it may be pixels, centimeters or other). Users can adjust the particle size through the slider or input box.

Particle Amount:

Controls the total number of particles in the simulation. In the example given, the number of particles is 1200. Users can change the density of particles in the simulation by increasing or decreasing this value.

3. Usage steps

Select color mode: Select the appropriate color mode according to your needs.

Set particle color: Select or enter a custom particle color from the color picker.

Adjust particle size: Use the slider or input box to set the particle size.

Set the number of particles: Set the number of particles in the simulation through the input box.

Start simulation: Click the Start or Run button to observe the dynamic effect of particles in the simulated gravity field.

4. Notes

When adjusting parameters, pay attention to the changes in the simulation effect in order to find the best parameter settings.

If the simulation speed is too slow or stuck, you can try to reduce the number of particles or reduce the particle quality to optimize performance.

Different color modes and color settings may have a significant impact on the simulation effect. It is recommended to try different settings to get the best effect.